As an Amazon Associate I earn from qualifying purchases.1. ARB
ARB CKMTA12 '12V' On-Board Twin High Performance Air Compressor by ARB
ARB - 2- compact twin motor, dual cylinder design makes it the highest flowing compressor in its class voltage vs. Highest air flow rate of any 12V compressor of its size on the market at 174LPM 6. 16cfm. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
Size. 1- motors are water sealed, and feature a unique linear brush pre-load system for extra long life, 100% ball bearing equipped i.
E. Note: air locker manifold Kit #171503 required to mount solenoids. International products have separate terms, are sold from abroad and may differ from local products, and language of product, age ratings, including fit, labeling or instructions.3
3- full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. No bushings, low heat and quiet operation throughout the life of the unit. Over-pressure safety valve equipped. 4- motors are internally thermal protected against extreme temperature damage.
| Brand | ARB |
| Manufacturer | ARB USA |
| Height | 11.99 cm (4.72 Inches) |
| Length | 50.01 cm (19.69 Inches) |
| Weight | 0.05 kg (0.1 Pounds) |
| Width | 26.01 cm (10.24 Inches) |
| Part Number | CKMTA12 |
| Model | CKMTA12 |
| Warranty | Warranty. |
2. ARB
ARB Air Compressor Mounting Bracket
ARB - Country of Origin: Thailand. Produced with the highest grade materials. Air compressor Component Type: Bracket. Satisfaction Ensured.
| Brand | ARB |
| Manufacturer | ARB USA |
| Height | 16.76 cm (6.6 Inches) |
| Length | 32.26 cm (12.7 Inches) |
| Width | 30.99 cm (12.2 Inches) |
| Part Number | 3550220 |
| Model | 3550220 |
3. Rago Fabrication
Air Compressor Mount for 2010-2023 Lexus GX 460 | Made in the USA | Compatible with ARB Single & Twin Air Compressor | On-Board Air System | Rago Fabrication
Rago Fabrication - Our on-board air compressor mount allows for you to travel freely across the trails of this beautiful nation. Every bracket is CAD designed and laser cut out of aluminum. Installation takes approximately 15 minutes from start to finish.
Quick installation - our mount is a breeze to install and will not require any drilling or trimming. Fast inflation - this bracket enables you to mount an air compressor under the hood, allowing you to quickly inflate your tires when its time to hit the highway home after running a trail.
Switch pros sp9100 can also be attached.
Fitment - the rago mount fits an arb single air compressor as well as a ARB twin air compressor. Made in the usa - we pride ourselves in offering efficient and reliable air mounts. Quality materials - our mount has been constructed with lightweight aluminum alloy and neatly mounts an ARB single or twin air compressor in an accessible location under the hood.
4. Rago Fabrication
Air Compressor Mount for 2003-2009 Lexus GX470 1st Gen | Made in the USA | Compatible with ARB Single & Twin Air Compressor | On-Board Air System | Rago Fabrication
Rago Fabrication - Switch pros sp9100 can also be attached. Quality materials - our mount has been constructed with lightweight aluminum alloy and neatly mounts an ARB single or twin air compressor in an accessible location under the hood.
Made in the usa - we pride ourselves in offering efficient and reliable air mounts. Fitment - the rago mount fits an arb single air compressor as well as a ARB twin air compressor.
Our on-board air compressor mount allows for you to travel freely across the trails of this beautiful nation. Quick installation - our mount is a breeze to install and will not require any drilling or trimming.
Installation takes approximately 15 minutes from start to finish. Fast inflation - this bracket enables you to mount an air compressor under the hood, allowing you to quickly inflate your tires when its time to hit the highway home after running a trail. Every bracket is CAD designed and laser cut out of aluminum.
5. Rago Fabrication
Air Compressor Mount for 2010-2023 Toyota 4Runner 5th Gen | Made in the USA | Rago Fabrication | Compatible with ARB Single & Twin Air Compressor | On-Board Air System
Rago Fabrication - Every bracket is CAD designed and laser cut out of aluminum. Fitment - the rago mount fits an arb single air compressor as well as a ARB twin air compressor. Fast inflation - this bracket enables you to mount an air compressor under the hood of your SUV allowing you to quickly & conveniently inflate your tires when its time to hit the highway home.
Our on-board air compressor mount allows for you to travel freely across the trails of this beautiful nation.
Installation takes approximately 15 minutes from start to finish. Made in the usa - we pride ourselves in offering efficient and reliable air mounts.
Quality materials - our mount has been constructed with lightweight aluminum alloy and neatly mounts an ARB single or twin air compressor in an accessible location under the hood. Switch pros sp9100 can also be attached. Quick installation - our mount is a breeze to install and will not require any drilling or trimming, except for 2020+ Models.
| Brand | Rago Fabrication |
| Manufacturer | Rago Fabrication |
| Height | 7.62 cm (3 Inches) |
| Length | 40.64 cm (16 Inches) |
| Weight | 1.8 |
| Width | 30.48 cm (12 Inches) |
| Part Number | R1418TT4RARB |
| Model | R1418TT4RARB |
6. ARB
Ideal companion for ARB CKMTA12 Twin High Performance Air Compressor, ARB 171601 Aluminium Compressed Air Tank 4L 1Gallon
ARB - 4 x spring washers. Mounting surface drilling template. 250mm l x 160mm h including mounts With the fittings installed the length of the whole unit is 290mm.
1 x aluminium air tank 4l1gal, 1030kpa150psi with 2 ports with 1/4NPT - JIC4 elbow fittings pre-installed. Tank dimensions, od 155mm. 4 x bolts, m6 x 16mm.
| Brand | ARB |
| Manufacturer | ARB |
| Height | 16 cm (6.3 Inches) |
| Length | 30.99 cm (12.2 Inches) |
| Weight | 1.36 kg (3 Pounds) |
| Width | 16.99 cm (6.69 Inches) |
| Part Number | 171601 |
| Model | 171601 |
| Warranty | Warranty |
7. Rago Fabrication
Rago Fabrication The Wifey Air System | Truck 120"+ Wheel Base | ARB Single & Twin Air Compressor | Hose Rated 170 PSI | Made in The USA
Rago Fabrication - Design - every component has been proven to last for decades. Made in the usa - built proudly in the heartland of America. Fitment - combine this setup it with our rago arb Compressor Mount, ARB Compressor and Air Mounts and you will soon be ready to hit the trails, not included in this kit.
Braided steel inlet line, slide valves, billet aluminum distribution block, solid brass fittings & chucks, & 3/8 high flow air lines. Compatibility - choose between our suv version or Truck Version SUV- 120" Wheel Base or Truck - 120"+ Wheel Base.
Fast inflation & deflation - this system will allow you to air up all 4 tires or & deflate in under 4-9 minutes using our 3/8 high flow air lines getting you back on the trail as fast as possible. Our wifey air system is curated at the highest standards and rigorously tested before being introduced to the market.
8. Rago Fabrication
Rago Fabrication Air Compressor Mount for 2014-2021 Toyota Tundra 3rd Gen | Made in The USA | Compatible with ARB Single & Twin Air Compressor | On-Board Air System
Rago Fabrication - Fitment - the rago mount fits an arb single air compressor as well as a ARB twin air compressor. Made in the usa - we pride ourselves in offering efficient and reliable air mounts. Quality materials - our mount has been constructed with lightweight aluminum alloy and neatly mounts an ARB single or twin air compressor in an accessible location under the hood.
Our on-board air compressor mount allows for you to travel freely across the trails of this beautiful nation.
Switch pros sp9100 can also be attached. Every bracket is CAD designed and laser cut out of aluminum.
Fast inflation - this bracket enables you to mount an air compressor under the hood, allowing you to quickly inflate your tires when its time to hit the highway home after running a trail. Quick installation - our mount is a breeze to install and will not require any drilling or trimming. Installation takes approximately 15 minutes from start to finish.
9. Rago Fabrication
Rago Fabrication Air Compressor Mount for 2016-2023 Toyota Tacoma 3rd Gen | Made in The USA | Compatible with ARB Single & Twin Air Compressor | On-Board Air System
Rago Fabrication - Please note - our mount is not compatible with Brake Booster equipped Tacomas. Every bracket is CAD designed and laser cut out of aluminum. It does not fit manual transmission due to location of clutch reservoir.
Fitment - the rago mount fits an arb single air compressor as well as a ARB twin air compressor. Quality materials - our mount has been constructed with lightweight aluminum alloy and neatly mounts an ARB single or twin air compressor in an accessible location under the hood.
Fast inflation - this bracket enables you to mount an air compressor under the hood, allowing you to quickly inflate your tires when its time to hit the highway home after running a trail.
Made in the usa - we pride ourselves in offering efficient and reliable air mounts. Our on-board air compressor mount allows for you to travel freely across the trails of this beautiful nation. This mount will cover your fuse block. Switch pros sp9100 can also be attached.
ARB - 2- compact twin motor, dual cylinder design makes it the highest flowing compressor in its class voltage vs. Highest air flow rate of any 12V compressor of its size on the market at 174LPM 6. 16cfm. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
ARB - Country of Origin: Thailand. Produced with the highest grade materials. Air compressor Component Type: Bracket. Satisfaction Ensured.
Rago Fabrication - Our on-board air compressor mount allows for you to travel freely across the trails of this beautiful nation. Every bracket is CAD designed and laser cut out of aluminum. Installation takes approximately 15 minutes from start to finish.
ARB - 4 x spring washers. Mounting surface drilling template. 250mm l x 160mm h including mounts With the fittings installed the length of the whole unit is 290mm. 1 x aluminium air tank 4l1gal, 1030kpa150psi with 2 ports with 1/4NPT - JIC4 elbow fittings pre-installed. Tank dimensions, od 155mm. 4 x bolts, m6 x 16mm.
Rago Fabrication - Design - every component has been proven to last for decades. Made in the usa - built proudly in the heartland of America. Fitment - combine this setup it with our rago arb Compressor Mount, ARB Compressor and Air Mounts and you will soon be ready to hit the trails, not included in this kit.
Rago Fabrication - Fitment - the rago mount fits an arb single air compressor as well as a ARB twin air compressor. Made in the usa - we pride ourselves in offering efficient and reliable air mounts. Quality materials - our mount has been constructed with lightweight aluminum alloy and neatly mounts an ARB single or twin air compressor in an accessible location under the hood.
Rago Fabrication - Please note - our mount is not compatible with Brake Booster equipped Tacomas. Every bracket is CAD designed and laser cut out of aluminum. It does not fit manual transmission due to location of clutch reservoir.