As an Amazon Associate I earn from qualifying purchases.1. Park Tool
Park Tool BBT-22 Bottom Bracket 20-Tooth Splines Tool,Blue
Park Tool - Model number: QKBBT22C. Can be turned with a 3/8 inch drive torque wrench, 3/8 inch ratchet driver, 32mm wrench, 1 inch wrench, or FRW-1 Freewheel Remover Wrench. The bbt-22 is a shop quality tool for installing and removing Shimano and ISIS Drive splined twenty-tooth bottom bracket cups.
Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup.
| Brand | Park Tool |
| Manufacturer | Park Tool |
| Height | 3.81 cm (1.5 Inches) |
| Length | 15.88 cm (6.25 Inches) |
| Weight | 0.16 kg (0.35 Pounds) |
| Width | 8.26 cm (3.25 Inches) |
| Part Number | BBT-22C |
| Model | BBT-22 |
2. nuoshen
Axis Wrench Tool DUB/TL-FC32 25 24 Adapter Repair Tool Aluminum Alloy BB Tool Remover for Cycling Riding Equipment, nuoshen Bottom Bracket Tool
nuoshen - Tl-fc25 type: the tl-fc25 type tool is suitable for shimano SLX/XT/105/ULTEGRABAS BB. Tl-fc24 type: the tl-fc24 type tool is suitable for sHIMANO XTR/DURA-ACEBAS BB.
Tl-fc32 type: fits shimano bb51, bb5700, for fsa megaexo, for hope, for pROWHEEL and other BSA BB, for sram/truvativ gxp, bb70, bb80, race face x-type, fits 16 notch rotor disc lock rings.
Easy to carry: the compact appearance is easy to carry and use, just lay it flat and press hard. High hardness, wear resistance, a high-quality tool used to install the bottom bracket cup, not easy to scratch the shaft. High quality: made of high-quality aluminum alloy, strong and durable.
3. YeenGreen
Professional Bicycle Repair Tool Kit, Bottom Bracket Disassembly Tool, Bike Repair Tool For Lock Ring Installation, YeenGreen Bottom Bracket Disassembly Tools
YeenGreen - High quality: the tool is made of high quality material, durable and practical to use. It is very sturdy and durable. Please apply a little lubricant, and then use a rubber mallet or the like to knock it for assistance.
Attention: the new bicycle bottom bracket wrench is very tight and will not move. Bottom bracket tool: with the multiHook you will get every bottom bracket off your bike, its a great addition to your toolkit or workshop.
Easy to use: used to disassemble or install the axle, the little tool on the other end to remove or install the pedal. Unique design: light and compact, so that you can use it more effortlessly.
| Brand | YeenGreen |
| Manufacturer | YeenGreen |
| Height | 2 cm (0.79 Inches) |
| Length | 30 cm (11.81 Inches) |
| Weight | 0.41 kg (0.9 Pounds) |
| Width | 6.5 cm (2.56 Inches) |
| Part Number | WRENCH-1 |
| Model | WRENCH-12 |
4. PRO BIKE TOOL
PRO BIKE TOOL Bottom Bracket Tool Compatible with Spline Type Bottom Brackets, For removing Road and Mountain Bike Splined Bottom Brackets for Bicycle Repair and Maintenance
PRO BIKE TOOL - Pro quality - we’re so confident about our bottom bracket removal tool that if you have any product issues, we’re very happy to either provide a Refund or a Replacement on your purchase! We’re also here to support you if you have any questions or queries, please get in touch and we’ll gladly help.
Compatible with Shimano, cyclocross, FSA and more. Can be used with splined bottom Brackets found on road, touring, Hope, commuter, MTB, gravel and E-bikes. Product dimensions - overall length 24. 8cm / 9. 76 inches, arm length 16.
5cm / 6. 5 inches, weight 302/ 067 lb and standard 20 spline socket. Treat your bottom bracket bearings to some tlc - kit your toolbox out with our professional Bike Bottom Bracket bearing extractor providing improved precision as well as reduced slipping to ensure stress free maintenance to remove and fit your Bikes Bottom Bracket.
Professional bottom bracket remover tool - for easy removal of any 20 spline Bottom Brackets. Built to last - high quality and durable heat-treated steel with chrome plating ensures wrench remains true and does not round through years of use. Comfortable and slip free handle - pvc dip-coated ‘ergonomically’ shaped 165mm / 6. 5 inch handle ensures your hand does not slip during use and provides a reliable grip when in use.
5. SPYMINNPOO
SPYMINNPOO Bottom Bracket Removal Tool, Adjustable Bottom Bracket Cup Pegs Pins Tool Adjustable Pin Lock Ring Spanner Bicycle Repair Tool
SPYMINNPOO - For most bikes: bicycle center shaft removal tool is suitable for most ordinary bicycle. Bottom bracket removal tool: Bicycle center shaft removal wrench is used to assemble and disassemble the bottom bracket and freewheel of the bicycle.
High strength wrench: the wrench is made of high quality carbon steel material, features strong hardness, no deformation and high durability. Wrench size is 165l x30w x7h mm/ 6.
5l x1. 2w x03h in. Adjustable opening: the distance between the hook claws can be adjusted, the hook claw length is 35mm/1. 4in, the maximum opening 6. 2cm/2. 4in. What you get: 1 x bicycle bottom bracket removal Tool, please feel free to contact us if you have any question. We are committed to providing you with better products and services.
6. Guichangkai
Guichangkai Bicycle Bottom Bracket Remover Tool 20 Teeth Bike Bicycle Freewheel Lockring Remover Bicycle Bottom Bracket Repair Tool Cycling Removal Repair Tool for SHIMANO、FSA、VP、LP
Guichangkai - What you get: you will get 1pcs bike Wrench Tool, usually used for any type of bicycle with suntour, shimano, truvativ chain set. Can be used in conjunction with a 24 mm socket, and small in size with a single size is 5*3.
2*3. 2cm, wrench or adjustable wrench. Sturdy material: the bicycle bottom bracket remover Accessories is made of sturdy and durable carbon steel, and has been hardened and heat treated to prevent rust and corrosion, and can be used for a long time.
Campatible with: bottom bracket removal remover tool is suitable for 20-tooth spline bottom brackets, such as SHIMANO, FSA, VP, LP, etc.
Lightweight and portable: road bike bottom bracket remover tool is lightweight with a single weight of 108g, which is easy to carry and use. Bottom bracket remover: our bike bottom bracket Remover Tool is a convenient tool for installing or removing the bicycle bottom bracket, which is an essential repair tool for bicycle enthusiasts.
7. JJ PRIME
Black, JJ PRIME Unisex's Crankset Removal Tool | Crank Repair Kit Set | BB Bottom Bracket Spanner | Bottom Bracket Tool for Install & Remove | Bike tool for Shimano Hollowtech 2 II Wrench
JJ PRIME - This differentiate from other spanner because the thread on the spanner does not wear easily. Great investment tool - our bike spanner make everything convenient when you are working on your bicycle at home.
Easy to use - jj prime's bb removal tool is simple and easy to use. In long term, it save you a lots of money because you can do it yourself. High quality - this bike crank removal tool is made of carbon steel which is stronger, harder and durable.
Compatibility - the shimano crank removal tool is approximately 22cm long. Most bearing bbs will fit in the open end of this spanner, and the opposite end has a tool for tightening the tensioning bolt.
Satisfaction guaranteed - based on the confidence in the quality, our hollowtech bottom bracket spanner is protected by worry-free support. Customer's satisfaction is our top priority. It is ideal and uniquely crafted to remove and install Shimano HollowTech II bottom bracket easily.
| Brand | JJ PRIME |
| Manufacturer | JJ PRIME |
| Height | 2.01 cm (0.79 Inches) |
| Length | 21.01 cm (8.27 Inches) |
| Weight | 0.2 kg (0.44 Pounds) |
| Width | 6.5 cm (2.56 Inches) |
| Part Number | unknown |
8. HAOSEA
HAOSEA Bottom Bracket Wrench spanner Bicycle Crank Wrench Bicycle Repair Install Tool for Mountain Bike 28cm Length
HAOSEA - High quality: made of premium and sturdy forged steel with hard plastic bracket cap, help you remove bike crank without an effort. It is suitable for all mountain bike, specifically designed to remove and install bottom bracket for Shimano Hollowtech II, DO NOT FIT: BBR60 Ultegr.
28cm length and 3. 5mm thickness, it is long enough to give you adequate leverage for installing and removing BB with the force you need.
Easy to use: used to disassemble or install the axle, the little tool on the other end to remove or install the pedal. Good for removing your bike crank. 2-in-1 design: one side design for remove bottom bracket cap, another side design for remove crank.
| Brand | HAOSEA |
| Manufacturer | HAOSEA |
| Height | 2.6 cm (1.02 Inches) |
| Length | 32 cm (12.6 Inches) |
| Weight | 0.28 kg (0.62 Pounds) |
| Width | 10.5 cm (4.13 Inches) |
| Part Number | HAO-HJH-ZXCLJBS-112 |
| Model | HAO-HJH-ZXCLJBS-112 |
nuoshen - Tl-fc25 type: the tl-fc25 type tool is suitable for shimano SLX/XT/105/ULTEGRABAS BB. Tl-fc24 type: the tl-fc24 type tool is suitable for sHIMANO XTR/DURA-ACEBAS BB.
YeenGreen - High quality: the tool is made of high quality material, durable and practical to use. It is very sturdy and durable. Please apply a little lubricant, and then use a rubber mallet or the like to knock it for assistance.
PRO BIKE TOOL - Pro quality - we’re so confident about our bottom bracket removal tool that if you have any product issues, we’re very happy to either provide a Refund or a Replacement on your purchase! We’re also here to support you if you have any questions or queries, please get in touch and we’ll gladly help.
SPYMINNPOO - For most bikes: bicycle center shaft removal tool is suitable for most ordinary bicycle. Bottom bracket removal tool: Bicycle center shaft removal wrench is used to assemble and disassemble the bottom bracket and freewheel of the bicycle.
Guichangkai - What you get: you will get 1pcs bike Wrench Tool, usually used for any type of bicycle with suntour, shimano, truvativ chain set. Can be used in conjunction with a 24 mm socket, and small in size with a single size is 5*3.
JJ PRIME - This differentiate from other spanner because the thread on the spanner does not wear easily. Great investment tool - our bike spanner make everything convenient when you are working on your bicycle at home.
HAOSEA - High quality: made of premium and sturdy forged steel with hard plastic bracket cap, help you remove bike crank without an effort. It is suitable for all mountain bike, specifically designed to remove and install bottom bracket for Shimano Hollowtech II, DO NOT FIT: BBR60 Ultegr.
