As an Amazon Associate I earn from qualifying purchases.1. UGREEN
UGREEN Car Phone Holder Air Vent Mobile Mount Gravity Stand Cradle Compatible with iPhone 12 Pro Max/SE/11/XR/XS/8+,Samsung S21 Ultra/S20 FE/S10/S9/A71/A51/A21s,Huawei P30,Xiaomi Mi10,Pixel 4aSilver
UGREEN - Free your hand for safe driving. Easy to fit your phone and no need to stick metal plate to phone or clamp the phone by 2 hands. The reserved charging port enable you to charge your phone and keep it on power even on this gravity mount. Premium quality: the gravity air vent holder iPhone stand is with durable and elegant aluminum alloy holder arms.
The gravity phone holder not only keeps your phone close to you for easy access and hands-free navigation, but also won't block your driving vision. Never worry about power off on your trip when this car mount is installed. Ready to use ugreen auto-clamping gravity air vent car phone holder without worry. Just clip this car phone mount onto the air vent and slip your phone into its gravity clamp.
Auto-clamp gravity linkage design: the gravity car vent phone holder features a auto-clamp gravity holder to hold your phone in place. Lock your phone automatically and grip it firmly. One-hand operation: ugreen car phone holder for air vent enables you to put down or pick up your phone simply with one hand.
Simply put your phone into the gravity holder, the gravity will retract the holder arms and form a stable triangle structure to securely hold your phone, even on speed humps or bumpy road. Universal fit: the mobile phone vent cradle fits 4. 7-7"phones of a thin protective case, lg, xiaomi mi 10t lite/mi a2/redmi note 9 pro, sony xperia l1/l3/xa/xz, like samsung galaxy s21 ultra/s21/s20 fe/s20+/s10 lite/s10e/note20 ultra/note10/s9/s8/a10/a20e/a21s/a40/a50/a51/a70/a71, OnePlus 8/7T/7 Pro, Moto G8/G7, iphone 12/12pro max/12 mini/se 2020/11/11 pro max/xs/xr/x/8 plus/7/6s, Huawei P30/P30 Pro/P20/P Smart/P10, HTC, Blackberry, Google Pixel 5/4a/3a/3 XL, Nokia 9/8/7.
2. Tsumbay
Cellphone Mount Mobile Clip Stand HUD Design Compatible with Smart Phone 3.0" to 6.5", Striped, Tsumbay CH02 Car Phone Holder
Tsumbay - The phone holder for a car has the vertically and horizontally curved design, clips the top lid tightly with the strong “teeth”ONLY applicable dashboard deep>5cm. Hud simulating.
Thanks to the anti-slip silicone pad, it makes your smartphone very stable. Dashboard mount. Best service. Safety & easy to use. This is the hud principle that allows you to keep your eyes always on the road to avoid unnecessary accidents while driving. Big clip.
The car phone holder has composed of an extendable arm and it is compatible with most smartphones with a size of 3. 0 "- 6. 5". Drivers can easily use one hand to touch the phone screen while driving without risk. The phone clamp holds a smartphone right above the dashboard and won’t obscure the road view for safe driving NOT suitable for a short person. We provides a 100% product satisfaction and 40-day money-back guarantee.
| Brand | Tsumbay |
| Manufacturer | Tsumbay |
| Height | 6 cm (2.36 Inches) |
| Length | 14 cm (5.51 Inches) |
| Width | 10 cm (3.94 Inches) |
| Part Number | CH02 |
3. VANMASS
VANMASS 2020 Upgraded Car Phone Holder 3 in 1, Patented Fingerprint Clamps & Air Capsule Pad & Stable Air Vent Clip, 1s Release, Phone Holder for Car Dashboard Windscreen Vent for All Mobile Phone
VANMASS - This phone car holder has been comprehensively optimized and upgraded based on global customer feedback, is 5X stable and flexible than other in car phone holders. Infinite viewing angleachieve the best infinite viewing angles by rotating the holder 360° horizontal and 120° arc through swivel ball joint & pivoting the telescopic arm up and down 270° and extending it from 5.
26" to 9. 81". What we upgraded8-gear stretchable bottom feet was designed to avoid clamp arms squeezing phone power/volume buttons and phone cradle blocking multiple cameras; Strongest suction cup loads up to 44LBS, made of pure PU with Nanotechnology, very sticky and won't melt under direct sunlight; Tightest clamps by innovatively optimizing 2 engaged gears for perfect 2-side control; Industry original steel-cored 3-gear lock vent clip has 20X stability & durability.
Friendly with smartphone 3. 5"-7. 3" with thick case, eg. Original design - top level configurationwith our design&material-focused coverage, vanmass breaks down the limit of innovation and security of car cradles.
Durable shock-absorbing carbon fiber on the phone cradle, bumpy road or sharp turn, Never Fall offJust Press 1S release button on the side to open the clamps, and it will stay firmly at the initial position. The 8-gear stretchable bottom feet design makes it perfect for all size phones even with a compact body; Fingerprint Clamp Design can squeeze the clamp quicker and tighter and never loose; Kind plastic material PTFE withstands extreme temperature from -40℃ to 100℃. Upgraded 3-in-1 designwith the steel-cored 3-gear lock air vent clip or strong sticky suction cup, it can be used for dashboard/air vent/windscreen according to your needs.
| Brand | VANMASS |
| Manufacturer | VANMASS |
| Part Number | CTEZ11 3 in 1 UK |
| Model | CTEZ11 3 in 1 UK |
4. VANMASS
VANMASS Car Phone Holder 3 in 1 for Car Dashboard Windscreen Air Vent Compatible with All iPhone
VANMASS - 3suction cup can be renewed by rinsing. Compatible with mobile phones between 4''-7'' with most case like otterbox/battery/wallet case. True all-around protection: adopt shock-absorbing faux carbon fiber on the cradle, more fitting solid silicone rubber on the 2-side clamps & holding feet to effectively avoid bumping, scratching, flying out and abnormal noise on your cell phone at all times.
Adjustable telescopic arm from 5. 26" to 9. 81", plus pivoted on 270° for best viewing angle.
Upgraded third version 3-in-1: applied on dashboard/air vent/windscreen with the super strong sticky suction cup & steel-cored air vent clip. Safe driving & no block in sight: flexible neck for the most ideal view when talking, navigating, listening to music or charging, no glance down from time to time.
One-hand operation, user-friendly: just press button on the backside to open the clamp arms smoothly and silently, then put your phone in and squeeze the clamp arms to hold your phone firmly without close onto the side buttons. Focus on details: 1silicone rubber pad protects phone from scratching. 4the materials adopted can overcome -40~90℃ extreme environments. 2extra sticky dash pad for perfect mounting.
| Brand | VANMASS |
| Manufacturer | VANMASS |
| Height | 14.73 cm (5.8 Inches) |
| Length | 8.89 cm (3.5 Inches) |
| Width | 7.62 cm (3 Inches) |
| Part Number | NR-4XEW-11RY |
| Model | CTVK13 UK |
5. RENQINGLIN
RENQINGLIN Car Phone Holder for Car Vent Accessories Sticker For Toyota Corolla Avensis Yaris Rav4 Auris Hilux Prius Prado Camry 40 Celica Fortuner
RENQINGLIN - Every detail is taken into account in the design of the phone holder to make life easier. Perfect design structure the unique panel bracket will perfectly match the car interior with fashionable taste. Convenient life the car holder releases the charging port of the phone, so you can easily charge your phone without disturbing normal operation when the battery is almost empty.
Cases & scratch free material soft silicone material used on all arms and spring loaded clip of this holder to protect the ventilation of your car and smartphone from scratches.
Ultra stable gravity linkage design allow you to lock and release your phone easily with one hand operation.
Structure can lower the center of phone gravity and provide ultra stability without abnormal noise generated during use. 100% risk free purchase keeping you satisfied and providing you with the friendliest customer service is our number one goal. The compact design of the car phone holder will divert the hot and cold air from the air conditioner without blocking the driver's sight. Offers 30 days money back guarantee.
6. miracase MOVING LIFE
Telescopic & Air Vent Mobile Phone Holder For Car Vent Dashboard Windscreen Compatible with iPhone 6s 7 8 Plus X Xr Xs 11 Pro Max Samsung S8 S9 S10 Huawei P30 Mate 20, Universal Car Phone Holder Mount
miracase MOVING LIFE - Clamp fits large mobile phone- foldable feet stand could allow you clamp your smartphone in the center when landscape. Adjustable long arm- extendable & 270° adjustable arm 18cm the longest and 360°Rotatable mount allow you assemble the best and safest viewing angle, bring NO blind-spot through dashboard.
Upgraded sticky gel suction- extra thick & transparent gel suction could bring more suction power and anti-heat performance. The package includes 1*telescopic & adjustable long arm phone holder which you can use on dashboard & windscreen, 1* Airvent Holder for horizonal or vertical car vent.
3 in 1 setup allow multi-places to install- buy one car phone holder to compatible with all cars. Rinsing the suction with hot water could make it reusable for years.
Note: don't buy if the depth of your car vent louver is more than 13mm. Vent hook included- 15mm-long hook clip will promise the mount and your phone well fixed on the air vent blades and NEVER FALL OFF through bumpy road. Easy to install on all kinds of dashboards and windscreen. Fit all phones & thicker case size 4" to 6. 5", huawei mate 30 pro, samsung 10 plus, compatible with iPhone SE and the latest iPhone 11 pro Max, Sony, Nokia and other cellphones.
7. miracase MOVING LIFE
Best Magnetic Car Phone Holder, Adjustable Mobile Phone Mount For Car Dashboard Windscreen Compatible With iPad iPhone 7 8 X Xr Xs 11 pro Max Samsung Galaxy S8 S9+ by miracase MOVING LFE
miracase MOVING LIFE - 4. Never block your view-- miracase Car Mount will bring NO blindspot through dashboard by its unique downward arm. Release the lever and press the suction 30s then lock the lever.
Make sure stick the metal plate on the back of the phone case. If applied the 3m adhesive pad, heat the pad and install the suction the next day. Adjustable for any angle - 2 hinges and a 360°Rotatable mount allow you assemble and customize the best viewing angle no matter on dashboard or windscreen.
Best reusable suction - thanks to the dia, 70mm sticky suction, it's easy to install it on all kinds of dashboards. Find a flat place and clean it. Wait an hour then mount your phone. 4 simple steps to install - 1. 2. Rinsing the suction with hot water could make it reusable for years. 3. 6 powerful magnets-- 2 more magnets than others, could even hold an tablet. Apply some heat to sticky suction.
8. Mpow
Mpow Upgraded Magnetic Car Phone Holder,Dashboard Car Phone Mount,Mini Magnetic Stylish Metal Phone Holder for iPhone
Mpow - Upgraded base with larger size upgraded base for a larger size at 32mm diameter, which means a larger adhesive area and strong adhesive tape in the mount bottom will help to stick on your dashboard more tightly. Suitable for most smartphones mpow dashboard magnetic car phone holder is compatible with most smartphones up to 6.
5inch and the weight of the phone with case should be no more than 300g Of course it can work on a phone case. Kindly note if there is any problem with phone holder, please contact us, please avoid the phone's charging area when sticking the metal plate; 4 Please use it after 24 hours of installation, We will solve the problem for you in the first time.
Note: 1 please stick mpow car mount to smooth and clean surface; 2 the case thickness should be within 2mm; 3if it is Qi-enabled smartphone, It will be more stable. It may interfere with the wireless charger if you stick the magentic pad in the charging area.
Just stick it avoid the charging area, such as Apple pay, or stick it to your phone case and take off your phone case while using a wireless charger. What's in the package 1*magnetic phone holder, 2*replaced 3m stickerreplacement for not sticky or need to restall it in different cars, 1*Alcohol Prep Padclean the area before sticking, 2*protective filmprotect your phone or phone case, 2*Metal Platetwo sizes for different phones, 1*User Manual. Don't worry about magnet affect it won't affect the normal use of phone, the signal and so on.
| Brand | Mpow |
| Manufacturer | Mpow |
| Height | 4.8 cm (1.89 Inches) |
| Length | 11.7 cm (4.61 Inches) |
| Width | 6.5 cm (2.56 Inches) |
| Part Number | 117AB |
| Model | MPCA117AB-UK-NEW |
| Warranty | 1 Year Warranty Against Manufacturer Defects |
9. Olixar
Olixar Magnetic Phone Car Mount for Car Air Vents, Super Strong Magnetic Hold, Magnetic Stickers for Phone Provided, Universal
Olixar - Use your phone safely a phone holder for car magnetic means you being distracted is a thing of the past. We offer a 2 year manufacturer warranty for this phone car holder magnetic. Super strong hold magnetic phone car mount assembled with 4 high powered magnets generating a powerful magnetic attraction.
Apply either of the provided metal magnetic plates to your phone or case, and you're ready to place it onto your magnetic car phone mount. This car phone holder magnet also features soft rubber grip that slides over air vents with ease.
Simply mount your smartphone onto the phone magnetic car holder then twist portrait or landscape for easy viewing. Universal compatibility car magnetic phone holder ideal for heavy phones such as the iPhone 12 Pro Max. Elegant air vent mounting magnetic car phone holder designed for car air vents.
Magnet car phone holder will hold your phone firmly in place, even on the bumpiest of roads. Box contents: 2 x high strength magnetic plates, 3M adhesive backed, 1 x magnetic phone holder, with installation instructions. A car phone holder magnetic removes unwanted clutter that comes from conventional car mounts and cradles. Ideal for mobile sat nav, with no more looking down or blocked windscreen. Whats included? a magnetic phone holder for car you can trust.
| Brand | Olixar |
| Manufacturer | Olixar |
| Height | 2.8 cm (1.1 Inches) |
| Length | 2.8 cm (1.1 Inches) |
| Width | 3 cm (1.18 Inches) |
| Part Number | MAGNETICVENTCARHOLDER0155492 |
| Model | OLX-MAGNETIC-VENT-CAR-HOLDER |
| Warranty | 2 Year Manufacturer Warranty |
10. Mpow
Car Phone Mount, Samsung S10/S9 Note LG,etc, Mpow Windscreen Car Phone Holder Grip Flex Universal Windshield Car Cradle with Extra Dashboard Base Long Arm Holder for iPhone Xs Max/Xs/Xr/X/8/7/6s Plus
Mpow - One-press mounting system easy to install one-touch mounting system locks releases or rotates the Device with Just One Hand Operation. With built-in anti-slip rubber pads, this mpow car mount ensures a secure & non-scratch grip even on a bumpy road or with severe brakes; no worry of phone falling off when driving.
Latest gooseneck design up to 10 inches in total length from holder back to suction cup that Easily Push Gadgets to Your Face. Long flexible arm allows for easy positioning, and brings the phone closer to the driver so you can keep your eyes on the road instead of looking down at your phone.
Dashboard base design extra dashboard support base, that have extra sponge dashboard base offers extra stability and security. 360 degree rotation one-touch mounting system locks release to installation with strong suction cup, 360 Degree Rotation with Multi-Adust Good Viewing Angel of Your Phone.
Make sure that you can keep your eyes on the road instead of fumbling around with your smartphone, trying to find a less than ideal position. Our car mount will double secure your smartphone and other devices, act as a fulcrum, allowing you a non-distraction drive. Wide compatibility securely holds most smartphones, sony, and works with most cases. Including apple iphone, LG and other smartphones between 2inch and 3. 5inch in width.
| Brand | Mpow |
| Manufacturer | Mpow |
| Height | 7.5 cm (2.95 Inches) |
| Length | 12 cm (4.72 Inches) |
| Width | 8.5 cm (3.35 Inches) |
| Part Number | Mpow |
| Model | MPCA033BB |
UGREEN - Free your hand for safe driving. Easy to fit your phone and no need to stick metal plate to phone or clamp the phone by 2 hands. The reserved charging port enable you to charge your phone and keep it on power even on this gravity mount. Premium quality: the gravity air vent holder iPhone stand is with durable and elegant aluminum alloy holder arms.
Tsumbay - The phone holder for a car has the vertically and horizontally curved design, clips the top lid tightly with the strong “teeth”ONLY applicable dashboard deep>5cm. Hud simulating.
VANMASS - This phone car holder has been comprehensively optimized and upgraded based on global customer feedback, is 5X stable and flexible than other in car phone holders. Infinite viewing angleachieve the best infinite viewing angles by rotating the holder 360° horizontal and 120° arc through swivel ball joint & pivoting the telescopic arm up and down 270° and extending it from 5.
VANMASS - 3suction cup can be renewed by rinsing. Compatible with mobile phones between 4''-7'' with most case like otterbox/battery/wallet case. True all-around protection: adopt shock-absorbing faux carbon fiber on the cradle, more fitting solid silicone rubber on the 2-side clamps & holding feet to effectively avoid bumping, scratching, flying out and abnormal noise on your cell phone at all times.
RENQINGLIN - Every detail is taken into account in the design of the phone holder to make life easier. Perfect design structure the unique panel bracket will perfectly match the car interior with fashionable taste. Convenient life the car holder releases the charging port of the phone, so you can easily charge your phone without disturbing normal operation when the battery is almost empty.
miracase MOVING LIFE - Clamp fits large mobile phone- foldable feet stand could allow you clamp your smartphone in the center when landscape. Adjustable long arm- extendable & 270° adjustable arm 18cm the longest and 360°Rotatable mount allow you assemble the best and safest viewing angle, bring NO blind-spot through dashboard.
miracase MOVING LIFE - 4. Never block your view-- miracase Car Mount will bring NO blindspot through dashboard by its unique downward arm. Release the lever and press the suction 30s then lock the lever.
Mpow - Upgraded base with larger size upgraded base for a larger size at 32mm diameter, which means a larger adhesive area and strong adhesive tape in the mount bottom will help to stick on your dashboard more tightly. Suitable for most smartphones mpow dashboard magnetic car phone holder is compatible with most smartphones up to 6.
Olixar - Use your phone safely a phone holder for car magnetic means you being distracted is a thing of the past. We offer a 2 year manufacturer warranty for this phone car holder magnetic. Super strong hold magnetic phone car mount assembled with 4 high powered magnets generating a powerful magnetic attraction.
Mpow - One-press mounting system easy to install one-touch mounting system locks releases or rotates the Device with Just One Hand Operation. With built-in anti-slip rubber pads, this mpow car mount ensures a secure & non-scratch grip even on a bumpy road or with severe brakes; no worry of phone falling off when driving.
